Strong Steel mounting plates for easy MAC2/MAC2U mounting.

MP2 Mounting Plates is produced for MAC2/MAC2U lifting columns. The mounting plates is designed for easy and simple install of the MAC2/MAC2U Lifting Columns in your applikation, by using the 6 outer Ø8.5 mm mounting holes.

MP2 Mounting Plates can be used as both the upper mounting plate and the bottom mounting plate.

It is important to use the right screws for the mounting of the MP2 Mounting Plates on the MAC2/MAC2U Lifting Column: 4 pcs. of M6 x 30 self-tapping screws in the aluminium profiles.

Material specifications:

• Material: 5mm galvanized steel
• Surface Treatment: Electroplating
• Screws: Steel

Option: Powder-lacquered/coated MP2 Mounting Plates (all RAL colors).

Technical data:

• Mounting plates size: 244mm x 65mm
• Top- and bottom mounting plates: Same for both ends
• Thickness: 5mm
• Mounting screw holes: Ø8,5mm
• Number of mounting screw holes: 6
• Plate mounting on the MAC2/MAC2U: 4 pcs. M6 x 30 self-tapping screws in the aluminium profiles (in both ends)
• MP2 plate mounting screw holes: Ø6,5mm
• Number of MP2 plate mounting screw holes: 4
• Max. torque for screw mounting in MAC2/MAC2U profiles: 6.8Nm at M6 x 30
• Maximum load: 3500N
• Dynamic bending moment: 500Nm
• Static bending moment: 1000Nm
• The mounting plates should be protected from longer water and humidity exposure to prevent corrosion.
• Operating temperature: + 5°C – + 45°C (same as MAC2/MAC2U)

Option: Movetec offers the MAC2/MAC2U Lifting Columns with pre-mounted MP2 Mounting Plates, directly from the factory in Denmark.